- In the furniture manufacturing industry, the proportion of component price of common materials such as pine, rubber, cherry wood, etc. accounts for only 30-40% of the total production cost. and only about 20-30% of the selling price. Thus, if a set of tables and chairs sells for 5 million, the price of wood materials is only about 1 - 1.5 million. This makes sense when a cubic meter of pine or rubber trees only cost about 3.5 million and making a set of tables and chairs usually requires less than half a block of wood. As such, you can also tread on your own with a cubic meter of good wood like oak..vv .. the price difference can not exceed more than 2-3 million on the selling price.
- So in the most expensive component price? That is the cost of production labor. With a person to make a table takes about 5 days, the cost of labor alone was nearly 1 million, almost equivalent to the cost of wood materials. Not to mention if it requires manual production, all input costs are rising from the cost of transporting some wood, to the cost of buying some paint ... v..v ..
- Thus, if the timber is good and produced industrially, the selling price will not be much different from that of regular wood. Appropriate difference is about 50%. For example, if you buy a pine chair of 400,000 VND, if made of oak, it will be about 600,000 VND (the same size).
- In fact, if sawing a wooden board with a width of over 40cm, it is very rare now. Even though it is rare, the quality, color or hardness of the wooden surface is not uniform. Wood near the core has a mechanical nature and a different paint color than the wood near the shell. Not to mention if the thin thickness will be very easy to warp. The wood panels are assembled from the mechanical bars and the colors are chosen to be similar to each other. Why limited lumber is warping. This is because the grafting technique is forced to knit between a stick with a vein pattern and a pattern with a vein pattern. Therefore, the whole piece will eliminate warping all over the sheet. Modern grafting technology with glue and draw frames also makes the wood so hard that when it is broken, the wood is broken in the wood, not at the grafting position.
- Thus, the wood is only suitable for customers who love crafts, natural, do not like to manufacture, not even paint and have to use very thick panels. When manipulating, compound wood is always the optimal solution for durability, color uniformity and anti-warping.
